Ex-Type Certificates of Conformity per Canadian and USA Standards requirements was issued by FM Approvals for SSS-903ME Gas Detector. The SSS-903ME Gas Detector is complied with Essential Health and Safety Requirements relating to the design and construction of equipment intended for use in potentially explosive atmospheres and compliance with following documents: FM Class 3600:2018, FM Class 6310, 6320:2001, ANSI/ISA – 12.13.01:2002, ANSI/ISA 60079-11:2014, ANSI/IEС 60529:2004, ASA-C22.2. No. 0.4:R2013, CAN/CSA-C22.2 No. 60079-1:20116 etс.

Ex approved rating: Ex d bib [ia IIC Ga] IIB+H2 T4 Gb, IP 66, Ta = -40ºC to +75 ºC

 

SSS-903 MT Gas Detector was approved by NANO “CCVE”, Russia, on the correspondence to standards EN 60079-0:2011, EN 60079-1:2007-04, EN 60079-11:2011 & EN 60079-18:2014. Certificate № IECEx CCVE 16.0006X was issued by NANO “CCVE”, Russia.

SGOES Gas Detector​ (model SGOES M11) was approved by FM Approvals on the correspondence to the ​ Canadian Standards by FM Approvals CAN/CSA-C22.2, ​ with application fields Class I, Division 1, Groups B, C ​a​ nd D, T4 Ta = -40°C to +85°C; Class I, II, III, Division 1, Groups A, B, C, D, E, F and G IP66.

SGOES Gas Detector​ (model SGOES M11) was approved by FM Approvals on the correspondence to the ​Directive 2014/34/EU ​and Ex level II 2 (1) G Ex db [ia IIC Ga] IIB+H2 T4 Gb Ta = -40°C to +85°C IP66. ​

Certificate № FM15ATEX0020X ​ was issued by FM Approvals (USA).

SGOES Gas Detector​ (model SGOES M11) was approved by FM Approvals on the correspondence to the ​ Canadian Standards by FM Approvals CAN/CSA-C22.2, ​ with application fields Class I, Division 1, Groups B, C ​a​ nd D, T4 Ta = -40°C to +85°C; Class I, II, III, Division 1, Groups A, B, C, D, E, F and G IP66.

Page 1 of 3

JSC "Electronstandart-pribor" 28, Zatsepa street, Moscow, 115054, Russia

Tel./Fax: +7 495 633 2244

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

http://esp.com.ru

Top